Post a Comment Print Share on Facebook

Best Way to Bump Start a Dirt Bike – Motorcross 101 Beginners Review

If you have any knowledge about vehicles, you will know that there is a battery inside every type of vehicle that you see around you

- 167 reads.

Best Way to Bump Start a Dirt Bike – Motorcross 101 Beginners Review

If you have any knowledge about vehicles, you will know that there is a battery inside every type of vehicle that you see around you. Whether it is a bike or a truck or a car or any other type, batteries are important for the smooth running of any vehicle. However, just like any other part of a car, even the battery requires timely servicing according to this resource. If you fail to do so, it will die out and your vehicle will not be able to start. If you ever notice that the batteries have died out on your dirt bike, instead of sitting back and cursing yourself, it will be better to bump-start your bike in simple steps.

Bump Starting Your Dirt Bike

There are several reasons for bike batteries to die. Improper servicing, excessive usage of the bike, and various other factors can make your bike batteries die out easily. It is very simple to get around this problem. All you have to do is find the nearest hill from where you can push your bike down. You may either seek help from a partner, if you have one, or you may do it yourself.

However, it is important for you to understand that bump starting your bike all the time is not something that is suggested. It is only meant for emergency situations. It is always a good idea to get your bike checked when it is crucial. This is especially when the battery has become bad and will not work in your favor anymore.

Factors to Keep in Mind to Determine If You Actually Need a Bump Start

Instead of the battery, there may be several other factors that may be forcing your dirt bike to stop every now and then. Sometimes, bump starting a dead bike may not be necessary at all. One of the first things to check is the gas tank. It will certainly not look good on your part if your bike fails to start just because the fuel tank is empty. Sometimes your failure to fill up the tank before going for a dirt biking adventure is enough to stop your bike. Although the solution to this problem is pretty simple, it may prove to be bad if you have already gone far enough.

It is also important for you to know that batteries tend to die if the dirt bike had been kept idle for a long time. Some of the other components of the bike may also get damaged if left unused for a long time. Any dirt bike that has not received proper care for several months or even years, will have a battery with no juice and several other things inside. It will be a good thing to conduct a thorough inspection of the bike. If possible, take the bike to a mechanic to get every component checked properly before you decide to take it for a ride.

Dirt bikes not starting may also be the result of the carburetor getting clogged. The best solution for this problem is to get the carburetor and jetting cleaned properly. It may so happen that these parts may be clogged due to the presence of grime and dirt collected from a number of rides in the past. It is very simple to clear out a clogged carburetor and you can also do it yourself. It will also hardly take an hour for the job to get completed.

Sometimes, the chain of the dirt bike may also get loose. This is a more serious and dangerous problem compared to those discussed earlier. If the chain gets loose, it may both come undone completely and harm you or the other components of the bike. This is a pretty dangerous issue and needs immediate solution before you even think of getting on the dirt bike for a ride.

Steps to Bump Start a Dirt Bike

Once you have checked your dirt bike properly and failed to locate any other problem apart from a dead battery, the only solution is to bump start the bike. Here are the steps you need to follow for the task.

  • Locate a Hill: First of all, try and locate a hill that has a good slope, which will help you get a good momentum and speed going. The slope of the hill should be nice and large enough to allow you sufficient time and space to help the bike get going. Good speed is necessary in order to shift to a higher gear such as second or third, which will depend on the right thing for the batteries to get its life back.
  • While Catching Speed, Hold the Clutch: As you descend, you will start to coast. At that time, make sure to grip the clutch properly. When you start a bike, you grip the clutch, which is necessary to start the engine and also make it respond the way it needs to start. When you pull at the clutch, you will be ready to shift up. This will help your bike reach a good speed which will also be comfortable for you.
  • Shift to Second or Third Gear: Once you reach the coasting phase and while gripping the clutch, try to shift the bike into the second or the third gear. When you do so, do make sure to keep the bike at the second or third gear. After your bike kicks in, you will not like the idea of being in the first gear. This will simply give a kick when the engine fires into motion.
  • Release the Clutch after Achieving Speed: After your bike finds a comfortable coasting place, release the clutch slowly. However, if you managed to locate a much larger hill, you can easily release the clutch more quickly. The reason behind this is you have already managed to find a comfortable speed and your bike does not require to be gradually cradled by a gentle touch. The idea is to slingshot your bike into speed. Thus, do not use the clutch too much.
Avatar
Your Name
Post a Comment
Characters Left:
Your comment has been forwarded to the administrator for approval.×
Warning! Will constitute a criminal offense, illegal, threatening, offensive, insulting and swearing, derogatory, defamatory, vulgar, pornographic, indecent, personality rights, damaging or similar nature in the nature of all kinds of financial content, legal, criminal and administrative responsibility for the content of the sender member / members are belong.