Hand saws are the backbone of a good craftsman

the Juice in the arms. Regardless of whether you are facing for the roof, or sitting with the floorboards within, so to have bicepsbrændstof enough to hold hand saws. For even if the electrical tool is gaining ground at the construction sites, so there are still tasks where the rugbrødsdrevne saw is both faster and better – if therefore the muscles enough, and the saw is sharp.

Therefore, according to the tv-carpenter Casper Kjerumgaard does not matter what fukssvans you, the you with. It is almost always in the arbejdsbilen and must be able to step in when the other tools are of.

– For me it's the backbone of it here craft. And a good craftsman. There is something satisfying in being able to create something with a fukssvans, for sometimes there a little too much machinery in it all, he says.

We have therefore teamed up with the værktøjsglade and muscular tv-carpenter to try to find the answer to what you get when you switch skrammelsaven to 50 dollars off with a more expensive alternative.

Five manufacturers have been asked to provide a fukssvans for universal use, which in their eyes is aimed at the professional craftsman and will cost around 200 to 250 excl. vat. And after 10 days in the company of them is Casper Kjerumgaard surprised.

I had suspected s with the coating not to be able to glide just as easily through the tree. But it is not the case. They are clear that they all are high end saws that cuts really well, he says.

A universal fukssvans is, according to the Casper Kjerumgaard on a task that may seem simple: It should be able to save effortlessly through the plywood and the wood lengthwise and across.

Here the player design and ergonomics a crucial role. In order to achieve the good incision must hand saws can also be good to hold and easy to control. In Casper Kjerumgaards eyes must therefore not be too big and wide, so it is in danger of becoming unwieldy.

– A good fukssvans is a saw that cuts well, as you can protect, and which is not too big, so you can control it, says Casper Kjerumgaard.

Just the degree of protection is one of the areas where the five testsave differ from each other. Where some comes with a papetui, available other with a piece of plastic that can be clipped around the teeth. And one manufacturer is going all in with a big beams with a plastic cut.

The more protection the better, believe Casper Kjerumgaard, for if an animal fukssvans to be meaningful, it must be able to keep better than the competitor for 50 bucks.

Casper Kjerumgaard points out that hand saws are not allowed and should cost in the region of 200 dollars in order to be good. After all, it is also possible to get a good fukssvans for 50 bucks – but it requires a lot more of the owner.

I once had a colleague we called Jens Perletand, because he only had one tooth. He had a fukssvans with the green shaft, and if you took it, then you were beheaded. It was true he, and he had made a protective cover for the plywood. It was wild what he could do with it. But it has probably not cost much more than 20 dollars at the time, remembers Casper Kjerumgaard.

Nevertheless think tv-the carpenter, however, he in the five tested fukssvanse has got more quality than you usually get in a cheap edition.

– Here, I think clearly, I can feel that price and quality go together. I have no experience of, that I could have gotten something similar for a 50's. Here you get clearly more steel and quality, he says, and points out that fukssvansene for example, all together are very rigid in the steel.

therefore They have not the same tendency to bend, which is a softer and thinner fukssvans typically have. By the same token, Casper Kjerumgaard not in doubt as to what he would choose.

– Now I'm also værktøjsnørd, but I will always go with the better quality. Even if I were to give a few hundred dollars more. In the long run it will keep better.

The five participating manufacturers all got the opportunity to ask with a universal fukssvans of 550 mm, which caters to professionals and has a recommended price excl. moms in the neighborhood of 200 to 250 excl. vat.TV-carpenter Casper Kjerumgaard have tested the s over ten days. He has along the way looked particularly at the savenes handle and protective cover and tested their ability to bite themselves fast in the tree and cut both along and across.Casper Kjerumgaard have used the five fukssvanse to cut in both plain wood and plywood.

--------- SPLIT ELEMENT ---------

the Bahco 2600-22-XT-HP

– If we need to talk about fukssvans-ergonomics, so we are close to 100 here. The saw must not be too wide across the back, the handle must not be far, and the grip should be close around the hand. The live the here up to. It is probably also stivest of all in the steel, and it counts up along with the jacket.

– Bahco comes as the only to the card, when cut lengthwise. It is not, because it feels like cutting in the butter with the other, but with Bahco-saw you really bog. It must be able to do better, and it pulls down, says Casper Kjerumgaard.

Staco X-treme Cut

– It is a surprisingly good fukssvans. I have a good grip on the handle, and it has a good rigidity and, not least, the protective cover – it is a big plus. The here fukssvans I would not go around it.

– It feels a little larger and heavier than the other. However, it is not necessarily a bad thing, weight is a matter of taste. To turn, the handle become very far, so it seems as if that is far from the hand and out to the blade. It gets hand saws that feels longer than the other, says Casper Kjerumgaard.

Irwin 10505541 Expert

– The here fukssvans I knew in advance, and I know that it is both good and durable. It has a good handle and cuts really well. Irwin-the saw performs best of all, when making the cross-section.

– we Look at the ergonomics, so is the little to the large side and very wide across the back. However, it can be an advantage if you make a wide incision in the fuldtømmer. Therefore, it is in my eyes a win for tagtømreren, who make stikspær, battens and the like. It counts down, it does not have anything other than a piece of cardboard as a robe, says Casper Kjerumgaard.

Winner: Hultafors HBX 22-9

– Here we have a fukssvans, which is rigid, has a crazy good ergonomics, because it is not greater, and then it cuts the game well across and along. Before the test I thought that the coating would provide more friction, but it does not.

– I would encourage everyone to make a plastiketui as Hultafors. It is very easy to click on.

– the Handle is like made for my hand. The distance between the grip and the blade is sufficiently short to me, but has great hands, can handle may be too narrow, says Casper Kjerumgaard.

Stanley 2-15-244

– If rugbrødmotoren must run in the best way possible, you should be able to keep well on the handle, so you don't have to continually adjust its grip. Here is Stanley together with Hultafors completely in the front. It has a super nice handle and is really good in my hand.

– hand saws also cut impeccably, both across and along the length of the veins, but there are only a papcover with. It is not good enough, for it can go beyond sustainability. Of course, you can put the tape on, but it pulls quite clearly down, says Casper Kjerumgaard.